Dymo DiscPainter Guia do Utilizador descarregar pdf (Página 5)

Section 2 - Cartridge questions:

a. How can I tell how much ink is left in the cartridge?

When the ink is running low in the ink cartridge, the ink status light

on the top of

the printer will first become solid yellow when the ink level drops below 20% and

then solid red when the ink level drops below 5%. You can also check the ink level

in the Printer Services dialog box. Refer to “Using Printer Services” of the User

Guide for more information.

n. How do I tell if my cartridge is out of ink?

The Printer Services Dialog Box will display 0%. You will also get a dialog box

stating that there is no ink.

To confirm that ink level is empty:

1. Disconnect the power cable from the back of the printer and wait a few minutes.

2. Remove the print cartridge from the printer and then place it back in the printer.

3. Connect the power cable and check the ink level again.

o. When should I clean the cartridge?

If you see white lines (blank lines where ink should appear), this could mean one or

more of the small nozzles that deliver the ink are clogged. You should clean the

cartridge.

Heavy cleaning should only be performed when the printer has not been used for

an extended period of time.

p. How do I clean the cartridge?

1. In the Printer Services Dialog Box, click Clean Cartridge.

2. Select the button beside the type of cleaning you want. Start by selecting

Light cleaning, and then if the problem is not solved try Medium and then

Heavy cleaning.

3. Click Clean.

4. Click Finish when done.

q. What is the warranty on cartridge?

There is no warranty on the cartridge.

1 2 3 4 5 6 7 8 9 10 ... 17 18

Sem comentários

Dymo DiscPainter Guia do Utilizador Página 5